Rev 2 GekkoScience 2-Pac Compac USB Stick Bitcoin Miner 15gh/s+ (BM1384x2) Reviews

Rev 2 GekkoScience 2-Pac Compac USB Stick Bitcoin Miner 15gh/s+ (BM1384x2)

Rev 2 GekkoScience 2-Pac Compac USB Stick Bitcoin Miner 15gh/s+ (BM1384x2)

  • 15+gh/s mining speed(Higher speed requires usb port above spec)
  • 32-.35 watts per gh!
  • Completely silent operation
  • 2x Bitmain BM1384 chips
  • 2-pac is the name(2 chips one board) This is not a “2 pack” of miners, but a single miner with 2 chips.

The most efficient USB miner ever manufactured is available in limited quantities! The 2-PAC Compac features 2 Bitmain BM1384 chips (same chip in S5) and a fully adjustable regulator design that gives you a core voltage range of 550mV to 800mV. Typical hasrate is 15+gh/s depending on clock rate. Efficiency is .31-.35 watts per gh. **NOTE** This is the “2-pac” usb miner. It is not a “2 pack” of usb miners. It is named 2-pac because it is a single miner with 2 asic chips, as opposed to 1.

List Price: $ 50.00

Price: $ 41.42

Antminer D3 19.3 GH/s X11 ASIC Dash Miner

Antminer D3 19.3 GH/s X11 ASIC Dash Miner

  • Hash rate: 19.3 GH/s (Variation of ±5% is expected)
  • Power consumption: 1200W (at the wall, with Bitmain’s APW3 PSU, 93% efficiency, 25°C ambient temp)
  • Hashing algorithm: X11 (Dash and many others)
  • Power consumption figures will vary with your PSU’s efficiency, the ambient operating temperature and the accuracy of the power meter. It recommends use of the APW3++ PSU with the Antminer D3. One APW3++ PSU can not power more than one Antminer D3
  • All PCIe connectors on a hashing board need to be connected to the PSU for the hashboard to operate. Do not connect more than one PSU to the same hashing board! Separate power supply to control board: there is one additional 6pin PCIe connector on the IO board which must be connected to the PSU to get power. Be sure to power on the miner only after all the PCIE connectors are connected to power supply

1. Specifications of the Antminer D3 are as follows:

a) Hash rate: Hash rate: 19.3 GH/s (Variation of ±5% is expected)

b) Power consumption: 1200W (at the wall, with Bitmain’s APW3 PSU, 93% efficiency, 25°C ambient temp).

c) Dimensions of the miner: 12.6 x5.12 x 7.5″

d) Hashing algorithm: X11 – Compatible Coins: DASH, ADZ, ARC, ATX, BOLI, BOPS, BSC, CANN, CNO, CNT, COXST, CREVA, CRM, DP, ENT, ERY, FAL, GILL, GRN, HCC, HPC, INFX, J-x11, KASH, KURT, LGBTQ, LKC, MAR, MARX, MMM, MND, MUE, OGN, ONX, OZC, PIZZA, PXI, SAND, SEV, SMC, START, TOR, TREAU, UIS-x11, VLTC, XCXT, XVP

2. Power consumption figures will vary with your PSU’s efficiency, the ambient operating temperature and the accuracy of the power meter.

3. It recommends use of the APW3++ PSU with the Antminer D3. One APW3++ PSU can not power more than one Antminer D3. (NOT INCLUDED)

4. All PCIe connectors on a hashing board need to be connected to the PSU for the hashboard to operate. Do not connect more than one PSU to the same hashing board!

5. Separate power supply to control board: there is one additional 6pin PCIe connector on the IO board which must be connected to the PSU to get power. Be sure to power on the miner only after all the PCIE connectors are connected to power supply.

6. Please select the correct address for shipping before you submit your order because, the shipping address cannot be changed after the order has been submitted. The seller does not take any responsibility for or compensate for any loss as result of downtime caused by delays in transportation as a result of custom formalities or other reasons.

List Price: $ 394.00

Price: $ 350.00

Find More ASIC Products

Add a Comment

Your email address will not be published.

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Translate »